Tool Box and Tools Review

Description

The tough Ingersoll Rand Edge Series 1/2in. Air Ratchet delivers superior comfort and control along with durability and increased productivity. The 1770G air ratchet can be used for a broad range of applications where light disassembly and assembly of products within tight spaces is necessary, such as general engine repair, home projects and light industrial work. No matter what the job entails, Ingersoll Rand Edge Series tools will help you conquer whatever the day brings. Average Air Consumption (CFM): 3, Case Included: No, CFM at Load: 20, Max. Torque (ft.-lbs.): 55, Min. Hose Size (in.): 3/8, Noise Level (dB): 94.8, Operating PSI: 90, Drive (in.): 1/2, Inlet Size (in.): 1/4, Tool Length (in.): 10.4, Tool Weight (lbs.): 2.6, Variable Speed: Yes, Reversible: Yes, Speed - No Load (RPM): 170

Features

1/2-Inch Drive
Powerful motor delivers 55-Feet-pound of torque and 170 rpm of free speed
Heat-treated ratchet head for longer life
Average Air Consumption: 3 cfm and/or 85 l/min and Free Speed Air Consumption: 20 cfm and/or 566 l/min

Disclaimer:

The owner of this page is a participation in the amazon service LLC associates programs,an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.this content is provided "as is" and is subject to change or removal at any time.

Description

-Range Cutting Depth: 0.08"(2mm).~
-Table Size: 25-3/4" x 6-3/8".~
-Fence Size: 21" x 4".~
-Fence Angle: 90 - 135°.~
-Included Dust Bag Collector.~
-Over All Dim: 29"L x 13"W x 13-1/2"H.

Features

6" Wood Jointer
Motor: 1-1/2HP @ 5.8 AMP, 110 Volt ~ 60Hz
Motor Speed: 10,000 RPM
Number of Blade: 2
Max Cutting Width: 6"(152mm)

Disclaimer:

Description

707000 Features: -Distressed:No -Power Source:Electric -Voltage:120 -Maximum Amperage:15 -Portable-Handheld:Yes. Dimensions: -Overall Height - Top to Bottom:20 -Overall Width - Side to Side:31.7 -Overall Depth - Front to Back:45.5 -Blade:Yes -Overall Product Weight:104.72 -Blade Length/Diameter:10

Features

Heavy-duty 15-Amp motor with soft-start
European-style riving knife and anti-kickback pawls meet UL standards, prevent kickback
Easy-folding wheeled stand for convenient storage, quick set-up and portability
Riving knife with anti-kickback pawls for safety
Weighing in at just under 100-Pound

Disclaimer:

Description

Ideal for use in limited space, this sturdily built 115V belt sander works on flat surfaces, corners, and radii. The sanding head tilts through 60 degrees, which eases access in many difficult spots. Head is cast aluminum for durability. Full wave electronics provide variable speed control. Belt speeds range from 300 fpm to 700 fpm. Platen is 3/8" wide and 4-5/8" long; overall sanding arm is 6-1/2" long. Vacuum dust attachment fits wands or hoses up to about 1-3/8". The motor draws approximately 100 watts. Belt replacement requires a push against the platen and bar, which loosens the present belt. Slip it off, slip the new one on the depressed bar and release. Track if needed and you're ready to go again.

Features

110-to-120-Volt AC; 60HZ; 1/8hp (100-Watt)
Length is 13-Inch; weight 1.9-Pound
Comes with 2 each 80 and 2 each 180 grit sanding belts
Replacement sanding belts are available in set of 5: 28581, 180 grit; 28582, 120 grit; 28583, 80 grit; silicone carbide belt for glass, brass, ceramics and steel, 28579, 180 grit

Disclaimer:

Description

The Milwaukee Sawzall has been the reciprocating saw of choice for professional contractors since 1951, and that’s not going to change anytime soon. The latest member of the legendary Sawzall line, the new Milwaukee 0719-22 Sawzall V28 Lithium Cordless Reciprocating Saw Kit, takes the cutting power, performance and reliability pro users and serious do-it-yourselfers have come to expect from Milwaukee, and combines it with the added bonus of cut-anywhere cordless convenience. The 0719 Sawzall is powered by a 28-volt Lithium-Ion battery that weighs less than a standard 18-volt Ni-Cad battery, yet delivers twice the run time. As a result, you can cut faster and longer with less fatigue and fewer battery changes. The tool weighs just 9.4 pounds with the battery installed. And the batteries are reversible, a feature that’s exclusive to Milwaukee tools. They can slide on from either direction, which allows you to counterbalance the tool’s weight depending on the battery placement. The saw’s variable-speed motor has two speed ranges: 0-2,000 strokes per minute (spm), and 0-3,000 spm, allowing you to choose the most efficient cutting speed for the job. And the tool’s superior 1 1/8-in. blade stroke ensures fast cutting with less motor strain. Other performance-enhancing features found on the 0719 include the Quik-Lok blade clamp for tool-free blade changes, a keyless shoe adjustment, soft-grip handle that dampens fatigue-producing vibration, and a gear-protecting clutch for improved durability. And each battery is equipped with an illuminated "fuel" gauge, so you’ll know when recharging is necessary. When fitted with the appropriate blade, the saw will cut through virtually any building material, including wood, drywall, plaster, asphalt roof shingles, plastic pipe, nail-embedded wood, copper tubing, fiberglass and most metals. A reciprocating saw is an indispensable tool for demolition work, remodeling projects, new-home construction, deck building, plumbing and electrical jobs, and heating and air conditioning installations. --Joseph Truini

Features

Two 28-volt, 3.0-amp hour lithium-ion batteries; power gauge on batteries indicates charge level; reversible batteries slide onto saw from front or back
Two-speed, variable-speed motor (0-2000, 0-3000 spm) for metal- and wood-cutting; superior 1 1/8-Inch blade stroke
Quik-Lok blade clamp for quick, tool-free blade changes; keyless shoe adjustment
Gear-protecting clutch for extreme durability and impact protection
5-year limited warranty

Disclaimer:

Description

Includes W8-125 5 in. 10,000 RPM 8.0 AMP Angle Grinder - 600263420, Side Handle - 314000970, Wheel Guard - 339203010, Inner Flange - 341031290, Face Spanner - 623934000, Outer Nut - 341101480

Features

Maximum Torque 19.5 inch lbs.
No-load speed (RPM) 10000
Toolless guard adjustment
Metabo slip clutch
2-position side handle

Disclaimer:

Description

This Porter-Cable 18-gauge, 1-1/4-inch brad nailer shoots standard brads from 5/8 to 1-1/4 inches long. The gun's die-cast aluminum body is lightweight but strong, and the handle is comfortable to hold, even over long periods of time. The quick-release nosepiece lets you clear jams quickly and easily. Features include a special hardened driver blade, a sequential fire trigger, a visual reload indicator, a safety that's located behind the driver guide for driving brads in tight spaces, an easy-to-adjust depth guide, a directional exhaust port, and a removable rubber nose. The kit comes with a 1/4-inch male coupler, a rugged plastic carrying case, 1,000 brads, and oil for the nailer. --Jonathon Tudor

Features

Disclaimer:

Description

OEM SPEC BELT / AYP/196857 Pack Size:1 Replaces OEM: AYP 196857, HUSQVARNA 532196857, CRAFTSMAN 33361 Fits Models: AYP Walk behind mowers, SEARS Walk behind mowers Specifications: Application: Drive, Length: 33", Type: Raw Edge, Width:

Features

Oem Spec Belt
Ayp/196857

Disclaimer:

Description

Features

Motor Power: 110-120V/60HZ / 1500Watts
Speed: 1400 Impacts Per Minute
360 Degree Swivel Handle
16" Flat Chisel (1-1/8"),Working Gloves, Slip Prevent Handle Grip, 16" Bull Point Chisel (1-1/8"), Protective Goggles, Oil Bottle

Disclaimer:

Description

The Klutch Air Impact Wrench delivers the power, performance and torque to tackle just about any jobs you come across. Twin hammer clutch mechanism and tough, lightweight composite housing for top performance and ease of use on the job. Cold forged striking hammer increases torque output and extends tool's life. Case Included: No, CFM at Load: 3.10, Drive (in.): 3/8, Hammer Mechanism: Twin, Average Air Consumption (CFM): 2.93, Min. Hose Size (in.): 3/8, Variable Speed: (3) Forward, (1) Reverse, Working Torque (ft.-lb.): 70-270, Standard Bolt Capacity (in.): 3/8, Tool Length (in.): 6 1/5, Noise Level (dB): 87, Reversible: Yes, Speed - No Load (RPM): 9,000, Inlet Size (in.): 1/4, Max. Torque (ft.-lbs.): 320, Tool Weight (lbs.): 2.7

Features

Composite housing for light weight and strength
Twin hammer clutch
9000 RPM free speed
Produces 320 ft.-lbs. max. torque
Cold forged striking hammer increases torque and extends tool life

Disclaimer:

Description

Stens,Plastic Deck Wheel / John Deere Gx10168 Pack Size:1 Replaces Oem: John Deere Gx10168 Fits Models: John Deere G100, L100, L105, L107, L110, L120, L130, D100, D110, D120, D140, D160, D170, Z225, Z245 And Z425 Specifications: Hub: 1 3/4" Offset, Bore: 5/8", Tread: Smooth, Wheel Size: 5-200, Does Not Include Bolts.

Features

Defects in Workmanship 30 Days

Disclaimer:

Description

The JET 16in. x 42in. EVS Pro Wood Lathe is a one of a kind machine for the true wood turner. With a 1.5 HP motor and electronic inverter, you can operate the machine at any speed from 50 to 3200 RPM for optimum wood lathe performance. Distance Between Center of Holes in. Distance between centers 42in., Motor Voltage 115 prewired 115V, Variable Speed Spindle speeds infinite, Includes Swing over tool rest base 12 in., Speeds 50-3,200, Spindle Diameter in. Spindle nose 1 1/4 in. x 8 TPI, Mount Type Stand alone, Material Type Cast iron, metal, Hole Diameter in. Hole through tailstock 3/8in., Ram Travel in. 4, Amps 4.6, Spindle Lock Yes, allows for ease of removing chucks and faceplates, Swing Swing over bed 16 in., Motor Phases 3. Digital readout allows operator to dial in the desired speed for best results Heavy-duty cast iron lathe bed adds stability while limiting vibration during operation Electronic inverter lets you operate the machine at any speed from Sliding headstock may be positioned anywhere along the bed ways for maximum flexibility and user comfort High/low speed change lever quickly changes belt positions Spindle has positive locking indexing in 10 increments for fast, efficient fluting and veining operations Live center has a removable pin for boring through stock Cam-lock mechanisms allow adjustments of headstock, tailstock and tool rest base without having to use tools Hollow tailstock allows you to perform long hole boring for lamps and other vessels Overall dimensions 59in.L x 29in.W x 28in.H Headstock taper MT-2 Centerline of spindle to floor 44 1/2in. Headstock movement Slide Indexing positions 36 1 1/2HP motor

Features

1-1/2-horsepower electronic woodworking lathe
16-inch swing, 42-inches between centers; variable speed (0-3,200 rpm)
Cast-iron bed and legs
Includes lathe, tool rest, faceplate, spur center, live center, knockout bar, tool storage rack
410-pounds for reduced vibration; 63-1/2 by 20 by 50-inches; 5-year warranty

Disclaimer:

Description

Designed for general purpose and drywall cutting, the DeWalt DC550KA Heavy Duty 18-volt Ni-Cad Cordless Spiral Saw comes with 1/8-inch and 1/4-inch collets. This saw features tool-free bit changes for fast and easy bit changing without a wrench, and its 18-volt, 26,000 RPM motor provides plenty of cutting power for industrial-size jobs. Other features include a dust-sealed switch for durability and long switch life and an adjustable guide. This saw comes with a 1-hour battery charger, two 18-volt XRP battery packs, one general purpose bit, one drywall cutting bit, 1/4- and 1/8-inch collets, and a heavy-duty kit box.

Features

Tool-free bit change for fast and easy bit changing without a wrench
26,000 rpm motor provides more cutting power
Dust-Sealed Switch protects against dust ingestion for longer switch life
Weighs 4-1/2 Pound
Included with saw: 1-hour battery charger, two 18-Volt XRP battery Packs, general purpose bit, drywall cutting bit, 1/4-Inch and 1/8-Inch collets, and heavy-duty kit box

Disclaimer:

Description

Stens carries a wide variety of OEM / aftermarket replacement parts for small engine outdoor power equipment. Fits DIXIE CHOPPER 300 series tractors EXMARK Viking, Explorer, Lazer Z, Metro, Turf Ranger, Turf Tracer and 300 series tractors HONDA 300 series tractors JOHN DEERE 300 series tractors

Features

Inside Diameter 2-inch
For 9-inch tank depth
Not compatible with greater than 10-Percent ethanol fuel

Disclaimer:

Description

The DEWALT versatile 10-Inch Jobsite Table Saw with Rolling Stand pairs a portable design with a powerful 15 amp motor and a max rip capacity of 24-1/2 inches. Offering application-specific setups with the Site-Pro Modular Guarding System, this saw comes with a miter gauge, a push stick, and a 10-inch, 24-tooth carbide blades, and compact rolling stand for easy transport.10-Inch Jobsite Table Saw
with Rolling Stand
At a Glance:Powerful 15 amp, high-torque motor delivers no-load speed of 3,650 rpm

Quick, tool-free adjustments with Site-Pro Modular Guarding System

Telescoping fence rails and rolling table saw stand for easy transport

Dust-collection port for fast clean up

Three-year limited warranty, one-year free service, and 90-day money-back guarantee
Saw is compact and portable at just 58 pounds and features a rolling stand for easy transportation. .

24-tooth carbide blade has max rip capacity of 24-1/2 inches. .Consistent, Powerful Performance
Thanks to a 15 amp, high-torque motor, this DEWALT table saw delivers the power you need for tough jobs like cutting hardwood and pressure-treated lumber. The saw's 10-inch blade spins at a no-load speed of 3,650 rpm for quick, clean cuts. Built-in electronic feedback helps the saw maintain consistent blade speeds, so cut quality remains consistently high--even when you're tackling the toughest applications.To ensure accuracy and user comfort, this saw features a heavy-duty internal motor mechanism that stabilizes the arbor and keeps vibration to a minimum. In addition, the saw's soft-start feature allows for extended gear and motor life by reducing start-up torque.Convenient Site-Pro Modular Guarding System
The DEWALT versatile Site-Pro Modular Guarding System makes it easy to set up for a variety of applications by allowing tool-free adjustment of application-specific guarding components.The saw's exclusive fence configuration enables a huge 24-1/2-inch rip capacity. Rack and pinion fence rails make fence adjustments fast, smooth, and accurate. The fence's telescoping design allows the rails to move out to 24 inches to rip full sheets of materials or be retracted for a compact design that's easy to transport.In addition to offering large rip capacity, this saw can cut dados up to 13/16-inch wide. It features a maximum cut depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees. And a big 26-1/2 by 19-1/4-inch table surface provides the support you need when working with large applications.For added convenience, on-board storage provides easy access to the Site-Pro Guarding components and the push stick when they're not in use. A handy 2-inch dust collection port allows you to connect the saw to a Shop-Vac for efficient dust extraction and a cleaner work area.Portable Design and Unique Rolling Stand
This DEWALT table saw weighs just 58 pounds which, makes for easy setup and tear down. You can move it from your workshop to the worksite with ease.This DEWALT features a rolling stand that makes transporting the saw around the worksite easy. This stand pairs heavy-duty aluminum construction with innovative details, like folding legs and convenient heavy-duty wheels. When upright, the stand puts your saw table top at an ideal 30-inches off the floor to keep your work at an ideal height and under control for accurate cuts. Plus, at just 33 pounds, this saw is built to roll right up stairs and over jobsite debris.This 10-inch jobsite table saw with rolling stand also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.What's in the Box
DW744XRS DEWALT 10-Inch Job Site Table Saw, DW7440RS Rolling Table Saw Stand, 10-inch 24-tooth carbide blade miter gauge, and push stick.

This DEWALT table saw has a heavy-duty, 15 amp
motor that delivers a no-load speed of 3,650 rpm.

Features

Site-Pro modular guarding system allows for tool-free adjustments of guarding components for each application
Exclusive telescoping fence delivers 24-1/2-inch rip capacity without sacrificing portability
Rack and pinion fence rails make fence adjustments fast, smooth, and accurate
Features a 15-amp high-torque motor with the power to cut pressure-treated lumber and hardwoods
Telescoping fence rails retract to create a small, portable package
On-board storage provides easy access to the Site-Pro guarding components

Disclaimer:

Description

Includes 64A 1-1/2 HP 10-in Single Phase Left Tilt Table Saw with 30-in Accu-Fence and Riving Knife - 1791227K, 30-in Accu-Fence System, 4-in Dust Collection Port, Left and Right Cast-Iron Extension Wings, Blade Insert, Dado Insert, Blade Guard and Splitter, Miter Gauge, Open Stand, (Blade Not Included)

Features

Perfect for the contractor, craftsman, or home hobbyist
1-1/2-horsepower, single-phase, 115/230-volt motor
30-inch Accu-Fence system delivers excellent results
Blade tilts left for easier bevel cutting
T-slot miter gauge, built-in 4-inch dust collection shroud, and two cast-iron extension wings included

Disclaimer:

Description

The Black & Decker Wizard is a high torque rotary kit with an adjustable speed (8,000-24,000 RPM) for maximum control based on your project needs. It uses a high powerful high torque motor to complete the job quickly and prevent the motor from bogging down. Accepts all rotary tool accessories. Includes 101 accessories and a kit box.

Features

Adjustable speed (8000 to high 24000 rpm)
Powerful high torque motor won't bog down
Accepts all rotary tool accessories
Up front on/off switch
Two year home use warranty

Disclaimer:

Description

Internal frame coating is formulated to convert and encapsulate the rust INSIDE your frame. Our formulation also incorporates zinc phosphate to further protect the metal from future corrosion. The viscosity is stabilized to assure proper flow and penetration to the existing corrosion and will yield complete coverage when sprayed with the included "conical nozzle". Easy to use, must have product, that is aerosolized to simply spray the entire inside of the frame with the supplied extension tube and "conical nozzle" for complete coverage and elimination of the rust for years of protection. This product is fully cured in 24 hours. 14 oz. Aerosol Vehicle approximate application coverage requirements. (1) 14 ounce Aerosol covers 10 sq. ft.(2) Cans for subframe (3) Cans for full frame (3) Cans for truck frame

Features

Converts, Encapsulates and Seals rust on internal frame surfaces
Phenolic Resin with Zinc Additive eliminates further corrosion
Easy to apply and full internal frame coverage with included extension tube and conical nozzle

Disclaimer:

Description

Makita LS1018 10" Slide Compound Saw has a large cutting capacity and Accuracy right out of the box. It is ideal for baseboard and crown molding installation, finish carpenters, cabinet and furniture makers, wood floor installers, deck builders, general construction and more.

Features

Powerful 13.0 AMP direct drive motor requires less maintenance and delivers 4,300 RPM
Miters 0-47 degrees left and 0-60 degrees right
Cuts up to 12" at 90degrees and 8-12" at 45degrees
Linear ball bearing system engineered to deliver "dead-on" accurate cuts
Rear handle bevel lock is easily accessible and adjusts 0-45 degrees (left and right)

Disclaimer:

Description

Compatible with Vacmaster VK811PH 8-Gallon Hepa Industrial Poly Tank with 2 Stage Motor and Vacmaster VK1011SIWTH 10-Gallon Hepa Industrial Vacuum Powder Coated Stainless Steel Tank with 2 Stage Motor. The high efficiency dust bag collects fine dust particles. Closure flap prevents spills. Includes 2 dust collection bags.

Features

Compatible with Vacmaster VK811PH and VK1011SIWTH
The high efficiency dust bag collects fine dust particles
Closure flap prevents spills
Easy to replace
Includes 2 dust collection bags

Disclaimer:

Description

Gold Eagle Start Your Engines is a fuel revitalizer to refresh old fuel and can be used in all 2 and 4 cycle engines. This easy to use formula prevents messy fuel draining by revitalizing old fuel right in the tank. You have to just pour in the recommended amount, (2 ounce treats up to one gallon) and Start Your Engines does the rest. This revitalizer ensures quick easy starts after extended storage, smooth idle and proper engine performance. It is easy to use, comes in a 4 ounce can and is enough for treating two gallons of fuel.

Features

Ensures quick easy starts after extended storage, and ensures smooth idling and performance in season
Ideal for all small 2-cycle and 4-cycle engines
Easy to use, just add to the equipments fuel tank
Removes water from fuel and prevents rust and corrosion
This item is not for sale in Catalina Island

Disclaimer:

Description

This high-speed, air-powered flooring cleat nailer offers better productivity than non-pneumatic nailers. The tool drives L-shaped 1-1/2- to 2-inch flooring cleats precisely, at a proper angle and depth, every time in 3/4-inch hardwood flooring. Made of aircraft-grade aluminum for job site durability and low weight, the unit also has an extra-wide composite base plate for added stability. The nailer's long-reach handle gives users added comfort and control. This nailer provides 420 in./lbs. of driving power, and has an operating pressure of 60 and 100 psi. It shoots 1-1/2- to 2-inch fasteners, and has a generous 110-fastener magazine capacity to reduce the time you spend reloading. Your purchase also includes a mallet.

Features

1-1/2-inch to 2-inch pneumatic flooring nailer for driving L-shaped flooring cleats
High-speed; extra-wide composite base; high-capacity magazine; 420 inch-pounds of driving power
Constructed of aircraft-grade aluminum
Includes rubber-tipped mallet
17-1/4 by 3-1/8 by 11-1/2; 11.2 pounds; 7-year limited warranty

Disclaimer:

Description

Delivering 0-1650 RPM and 0-2600 BPM, DeWalt's DW059 cordless impact wrench lets you handle a wide range of heavy-duty fastening and loosening applications quickly and easily. The heavy-duty impact mechanism of the DeWalt DW059 directs 300 ft-lbs of maximum torque to the fastener without kickback. This cordless impact wrench is capable of performing a wide range of fastening applications, like roofs and wall applications, metal to metal application, metal to wood applications, light-duty fastening applications, and more. The textured, anti-slip grip of the DeWalt DW059 reduces user fatigue and discomfort. The durability of this impact wrench tool is further ensured by the magnesium gear case and all-metal transmission.

Features

300 ft-lbs of maximum torque,1,650 rpm/2,600 bpm for fast application speed
Preferred rocker switch design for fast and easy fastening
Comfort grip provides maximum comfort
Durable magnesium gear case, all metal transmission, heavy-duty impacting mechanism directs torque to fastener without kickback
Tool only (battery not included)

Disclaimer:

Description

Makita XT248 LXT 18V Cordless Lithium-Ion Brushless 1/2 in. Hammer Drill and Impact Driver Kit. Includes 1/2 in. LXT Brushless Lithium-Ion Hammer Drill Driver - LXPH06, 1/2 in. LXT Brushless Lithium-Ion Hammer Drill Driver - LXTD08, (2) LXT Lithium-Ion 3.0 Ah Batteries - BL1830, Rapid Optimum Charger - DC18RC

Features

Efficient BL(TM) Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
The BL(TM) Brushless Motor eliminates carbon brushes, enabling the BL(TM) Motor to run cooler and more efficiently for longer life
The electronically-controlled BL(TM) Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
Variable 2-speed 1/2"" Hammer Driver-Drill (0-400 & 0-1,550 RPM) with Brushless Motor delivers 530 in.lbs. of Max Torque and weighs only 3.9 lbs.
3-stage L.E.D. gauge indicates battery charge level
Extreme Protection Technology (XPT) is engineered for increased dust and water resistance for operation in harsh jobsite conditions
Variable speed Impact Driver (0-2,500 RPM & 0-3,200 IPM) provides 1,420 in.lbs. of Max Torque and weighs only 3.4 lbs.

Disclaimer:

Description

The PS32 weighs up to 45 percent less than competitors. Bosch PS32 12-Volt Max Brushless 3/8-Inch Drill/Driver Bosch proves good things come in small packages with the introduction of its new 12-Volt max brushless drill/drivers. The PS32 12-Volt Max Brushless 3/8-Inch Drill/Driver is the lightest, most compact tool in its class, offering unmatched ease of use in extended applications. Bosch Best Built Cordless The new line of Bosch EC Brushless Power Tools are the finest examples in German engineering. Unparalleled performance, durability and a no nonsense service plan are what makes these tools as tough and dependable as the people who use them.
The PS32 offers unmatched ease of use in extended applications. Power, Durability, Versatility The lightweight PS32 is the tool of choice for professionals who perform continuous overhead work. In fact, at only 2 pounds, this tool weighs up to 45 percent less than competitors. The PS32 also delivers optimum performance when utilized in corners or other confined spaces. With a head length of 6-1/2-Inches, this drill/driver is the shortest in its class. This compact drill/driver delivers the ultimate in functionality with a 3/8-inch single sleeve universal chuck that accommodates 90 percent of common applications. The PS32 is also equipped with a built-in LED light, which can be used to illuminate any working area. What's Included The PS32-02 includes two 12-Volt max 2.0-Ah batteries, a magnetic bit holder, four-piece bit tip set, a belt clip, charger and a soft carry case. The Bosch EC Brushless Motor requires no maintenance over time. The Best Tools The PS32 is equipped with Bosch's next generation EC Brushless motor, which provides 2X motor life, superior efficiency for longer runtime and absolutely no maintenance. For increased versatility and control in drilling and driving applications, the PS32 can operate in two speeds: 0-400 RPM and 0-1,300 RPM. Protect your tools with the Bosch No Fine Print Protection Plan. The Best Protection Plan We stand by our tools. Bosch's No Fine Print Protection plan provides 3 years of tool coverage, 2 years of battery coverage and 1 easy number to reach our customer service team. The Best Batteries The next general Bosch lithium-ion batteries allow you to run harder and longer with cold weather performance (as low ats -4 F). With no increase in size or weight, our 2.0Ah battery provides up to 50% longer runtime. The new 4.0Ah battery doubles the runtime of the 2.0Ah, while still remaining the smallest and lightest weight 12V 4.0Ah battery on the market. The Bosch Click & Go System helps professionals increase productivity on the job. The Best Mobility The Bosch Click & Go System is the ultimate in organization, storage and mobility. All Bosch L-BOXX products offer flexible storage solutions for their users, making them unique in the current marketplace. With better customizable organization, downtime spent searching for tools and parts becomes non-existent. In addition, fewer trips will have to be made from the workshop or storage unit and to the store, since your tools and accessories can now be stored in one custom, organized area. This system is integrated with all L, BL and BN SKUs, and is customizable with all Bosch Tools.

Features

Light Weight: At only 2 pounds, this tool is great for continuous work overhead
Improved runtime: Brushless motor and 2.0-Ah battery provides increased runtime for continuous work in high energy applications
3/8-Inch Single-Sleeve Universal Chuck with Auto-Lock: Newly developed to accommodate 90-percent of common applications
20+1 Clutch Settings and 2-Speed Gearbox: Precise torque adjustment for precise screw driving
Interface for Belt Clip/Bit Holder: Easy transportation and storage of bits

Disclaimer:

Description

The Dremel 4200 Variable-Speed Rotary Tool is the first ever rotary tool with the EZ Changeâ"¢ mechanism for the easiest and quickest accessory change. The innovative EZ Changeâ"¢ system is the fully integrated quick-change mechanism that allows easy and fast accessory changes without a wrench. Now, completing projects will be more convenient and faster than ever before. Offering the highest performance and most versatility of all Dremel rotary tools, the Dremel 4200 features electronic feedback circuitry that enables consistent performance at all speed levels. Dremel 4200 can use all existing Dremel accessories and attachments to complete the widest range of projects. A slim, ergonomic body provides a 360Â° grip zone for comfort and control in any grip position. The 4200 has a separate on/off switch and variable-speed dial that allow convenient speed adjustment and maintain the selected speed even when tool is turned off.Includes: 4200 VS Rotary Tool, EZ407 - EZ Drum Mandrel, 408 - 1/2" 60-Grit Sanding Bands (x6), 432 - 1/2" 120-Grit Sanding Bands (x6), 445 - 1/2" 240-Grit Sanding Bands (x6), EZ402 EZ - Lock Mandrel, EZ411 - EZ Lock Coarse Sanding Disc (x3), EZ412 EZ Lock Medium Sanding Disc (x3), EZ413 - EZ Lock Fine Sanding Disc (x3), EZ409 - Thin Cut 1-1/2" Wheel, EZ456 - Metal 1-1/2" Cut-Off Wheel, 107 - 1/8" Engraving HS Cutter, 191 - 1/8" High Speed Cutter, 561 - Spiral Bit, 8193 - 5/8" Aluminum Oxide Grinding Stone, 84922 - 3/16" Silicon Carbide Grinding Stone, 932 - 3/8" Aluminum Oxide Grinding Stone, 403 - Brush Wheel, 428 - Carbon Brush Wheel, 150 - 1/8" Drill Bit, Adapter and Drive Coupler for Attachments 225, 575 and 670, and Storage Case.

Features

Most powerful and versatile rotary tool in the Dremel line
EZ Change system-change all Dremel accessories without the wrench or collet lock
Cooler running with 20-percent more air flow in venting design
Variable speed of 5,000 - 35,000 RPM with electronic feedback
Includes 6 attachments and 40 accessories for maximum versatility

Disclaimer:

Description

Reusable Dry Filter bag with Clamp Ring, fits 1-5-Gallon Stanley vacuumuum. (1 bag with 1 clamp ring per package). Job is easier when you have the right tools. Whether you are vacuumuuming your garage, workshop, or indoor floors, picking up liquids, cleaning your car, or cleaning up outdoors, there-Feet a Stanley accessory to make cleanup easier, quicker, and more efficient. Accessories are interchangeable with other major brand wet or dry vacuumuum equipment. Stanley wet or dry vacuumuums provide superior performance in any environment. Stanley vacuums make short work of even the toughest jobs, saving you time and effort. vacuum-the number one name in vacuum industry.

Features

Reusable dry filter bag with clamp ring
Fits 1-5-Gallon Stanley Vacuum
1 bag with 1 clamp ring per package
Stanley accessories make cleanup easier, quicker, and more efficient
Interchangeable with other major brand wet/dry vacuum equipment

Disclaimer:

Description

Put the finishing touches on your projects with the Bostitch N62FNK-2 Angled Finish Nailer. A magnesium body makes this nailer durable and lightweight, and oil-free maintenance and an easy-load magazine make it easy to use. Adjustable settings let you set the perfect nail depth for the job, whether you're working with furniture, molding, or trim.
The Bostitch N62FNK-2
Angled Finish Nailer
At a Glance:400 in./lbs. of driving powerAdjustable nail depthLightweight, durable magnesium housingIncludes four profile tips and sample fasteners1.25" to 2.5" nails are ideal for furniture projects or trim work. .

With its lightweight magnesium
body, this nailer is perfect for
over-the-head jobs. .

Angled profile tips help you drive nails at the proper depth and angle.
.Give Your Home a Professional Finish
The N62FNK-2 Finishing Nailer is the perfect tool for tackling the detail work that makes your home stand out. Use this nailer with a standard air compressor to add trim around windows and doors, apply crown molding, or work on furniture projects. For a pristine finish, a choice of four angled profile tips ensures the perfect drive every time. Also, this nailer features oil-free operation, so it's easy to maintain and it won't stain your workpieces.Adjustable to Match the Task at Hand
The N62FNK-2 has adjustable nail-depth settings and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job quickly and easily. And with a driving power of 400 in/lbs, you can easily set 15-gauge finishing nails into even the most challenging hardwoods with power to spare.Additionally, the N62FNK-2 has a tool-free magazine that holds 130 nails (1.25-inches to 2.5-inches in length), so you can knock out plenty of work in a single load. For added convenience, the magazine removes easily for cleaning and jam clearing.Lightweight, Durable Construction for Everyday Use
The magnesium construction of the N62FNK-2 Angled Finish Nailer means this tool is light enough to use all day, while still being strong enough to reliably use again and again. Measuring 3.13 x 11.63 x 14.69 inches (WxHxL) and weighing just 3.8 pounds, this tool is perfect for over-the-head jobs, such as mounting crown molding, hanging shutters, installing cabinets, and more.When you've finished the job, the N66C-1 and profile tips store neatly in a protective carrying case.The Bostitch N62FNK-2 Angled Finish Nailer is backed by a seven-year limited warranty.About Bostitch
Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.What's in the Box
Includes the finish nailer, no-mar tips, four profile tips, fasteners, and a durable carrying case.

Features

1 1/4-inch to 2-1/2-inch 15-gauge oil-free angled finish nailer
Tool-free removable and angled magazine; adjustable depth control; bypass nail pusher
Durable, lightweight magnesium housing
Includes 4 profile tips along with sample fasteners
11.63-by-3.13-inches; extremely light 3.8-pounds; 7-year limited warranty

Disclaimer:

Description

Evolution's 12-Inch Electric Disc Cutter easily cuts concrete, stone, brick, paving and other stone materials with the supplied diamond blade. The powerful 2400W motor makes easy work of the most robust materials and because it is electric powered, there are no harmful fumes, making it ideal for work in enclosed areas. The ergonomic support handles are easily positioned for perfect balance when cutting. The spindle lock mechanism makes blade replacement quick and simple. Easy to use and maintenance free, the Evolution Disc Cutter is the ideal alternative to gas powered disc cutters. Requires a 20 Amp Power Source with Perpendicular Plug Outlet.

Features

2400W/20A Hi-torque motor
Easy to use and maintenance free
4-Inch maximum cutting depth
No harmful fumes emitted
Requires 20 amp power source with perpendicular plug outlet

Disclaimer:

Description

With its compact size and spirited performance, the 1-horsepower Colt variable-speed palm-grip router kit from Bosch is a very versatile tool. It's not just a laminate trimmer, but is ideal for trimming deck planks, hinge mortising, edge forming, slot cutting, dovetailing, window cutouts and decorative inlays. The PR20EVSNK variable-speed palm-grip router kit has a palm-grip design with soft grip to make it the most comfortable router in its class, yet it also has enough power to do the job and is more comfortable and easy to use than larger routers. The softstart reduces start-up torque while the Bosch constant response circuitry monitors and maintains speed under load for consistent performance and overload protection. Easily move the motor from base to base with the quick-clamp system to work on other areas of your project. A convenient Front Spindle Lock on the motor was designed for easy, one-wrench bit changes, and a shaft wrench is also included for those who prefer to use two wrenches to change bits. Bosch even covered the small details by angling the cord to help keep it out of the way. The contents of this kit make it ideal for all router users.

Features

Variable-speed palm-grip router kit; soft-start and quick-lock systems
5.7 amp motor with 16,000 - 35,000 rpm; depth adjustment system and finger support pockets
Aluminum construction and soft-grip
Includes palm router, fixed base, roller guide, offset base, tilt base, underscribe attachment, drop-forged collet and shaft wrenches, collet, straight-edge guide, case
11.8-Pound; 1-Year warranty

Disclaimer:

Description

Makitas exclusive Super Joint System feature prevents tool kickback and gear damage caused by accidental wheel binding. An improved 12 Amp motor design increases output power in a more compact tool. Electronic limiter stops the motor and prevents accidental motor overload and burnout, while larger and improved carbon brush material extends tool life. Labyrinth construction seals the motor and bearings, protecting them from debris by creating a complex set of channels. Protective zig-zag varnish seals armature and field from contaminants and reduces heat. Amps: 12, Battery Included: No, Length (in.): 10 7/8, Product Type: Handheld, Side Handle: Yes, Speed (RPM): 10,500, Spindle Thread Size: 5/8 in. x 11, Switch Type: Paddle switch, Variable Speed: Yes, Wheel Diameter (in.): 5

Features

Powerful 12 AMP motor design for increased output power in a more compact tool
Super Joint System (SJS) helps prevent gear damage
5 stage variable speed control dial for matching the RPM to the work
Electronic limiter stops the motor and prevents accidental motor overload and burnout
1 year warranty
Super Joint System (SJS) technology helps prevent gear damage caused by accidental wheel binding
Variable speed control dial enables user to match the speed to the application

Disclaimer:

Description

The Kawasaki Impact Wrench has input power of 7.5 Amp, 60 Hertz, 120 Volt, with no load speed at 2100-RPM. Features Max Torque of 220-Feet/-Pound, with an Impact Per Minute at 2700 Ipm. Includes a Metal Gear Box for durability, an isolated Forward/Reverse switch, and accessories-4 Piece 1/2-Inch Dr Sockets, 11/16-Inch, 3/4-Inch, 13/16-Inch, 7/8-Inch.

Features

Input power of 7.5 Amp, 60 Hertz, 120 Volt
Max Torque of 220-Feet/-Pound
Impact Per Minute at 2700 Ipm
Includes a Metal Gear Box for durability, and accessories-4 Piece 1/2-Inch Dr Sockets, 11/16-Inch, 3/4-Inch, 13/16-Inch, 7/8-Inch